The hammer mill also named hammer crusher, and crushes materials by
the collision between the high-speed hammer and materials. The
hammer crusher is used to crush mid-hardness and weak corrosive
materials, whose compressive strength is under 100 Mpa, and water
ratio is less than 15%. Hammer mill possesses qualities of simple
structure, large reduction ratio, and high-efficiency. Both Dry and
Wet Process are available.
Hammer mill performance and features:
1.Capacity increased by 5-10% capacity up to 2500 tph.
2.Wear parts last longer. The AMC alloy hammerhead (Big Gold
Teeth?) enjoys a service life increased by 50~150%.
3.The new hammer rotor consists of a heavy, forged, square
cross-section shaft fitted with cast steel rotor discs. The special
"sandwich" assembly of the discs is a robust construction,
preventing distortion and crack formation.
4.The wear parts of the hammer mill are easily replaced due to the
hydraulic opening device.
5.Easy to service and maintain.
Hammer mill working principle:
In the hammer mill machine, the motor drives the rotor rotate at a
high speed through the belt, and on the rotor there are series
hammers. When the materials get into the working area of hammers,
the rotating hammers with high rotation speed are crushing them,
the products which are crushed to meet the required size can be
discharged by the outlet and become the final products, the large
size products are brought back to the crushing area by the hammers
for being re-crushed until they reached the required size.